If you’re someone preparing to build a new home in a hurricane-prone region, you may wonder what structure material is the very best to get a hurricane proof house? As soon as we ask that question we are typically referring to this frame (skeleton) of their house. The decision of what stuff to use on the framework home is vital, and there are numerous aspects that go into that decision. These factors include material price, performance, and simplicity of construction. For those people living in a coastal area, the substance performance is of particular significance, but the other factors must be analyzed too. This article contrasts two construction materials to construct a home in a hurricane-prone region. Nearly all people may assume that timber is the only choice for residential construction, but I would encourage you to weigh the benefits of concrete or other solution.
Once we talk of wood structure, we are referring primarily of the traditional wood structure using dimensional lumber and plywood. The frame is constructed with studs, rafters, and joists. Traditional wood construction is done onsite (stick built) or partially in a shop (prefabricated). Examples of wood construction comprise wood trusses or modular homes constructed in the shop and delivered to your job site. The modular home business is growing and is marketing itself into the high-end housing markets. Other methods of building with wood comprise heavy timber framing and structural insulated panels.
The largest benefit of timber building is its comparative cost. Houses can typically be built less expensively with wood compared to other material options. This is the primary reason that timber building is so widespread. Wood has existed for decades and has proved itself to be a viable construction material to withstand the weather. Like any construction material, nevertheless, when not constructed or designed properly, wood has come up short in the face of Hurricanes. So, it’s possible to construct a house to resist hurricane force winds, but some steps must be taken to make sure it is designed and built properly. An employer once told me that the most important consideration to look for when designing with wood was that the relations. Connections are king when it comes to wood, so pay special attention to the area. Most building departments require that some engineering is done in order to make certain that the connections, and other critical items, be evaluated before a permit is issued to your home. Build with us at Remuda Building.
In regards to functionality, there are many benefits to building a home with concrete. Concrete is strong, resistant to rust, fire, termites, and mold. This material is truly sustainable, and that involves sustaining a hurricane. This, of course, assumes that the material is designed and installed correctly. The concrete structure could be built using either types or by using preformed units (aka timber or cubes ).
The most basic way of installing concrete is to construct plywood molds, and then pour the cement walls and flooring, which rest on a concrete base. The steel reinforcing is placed within the formwork before pouring the concrete. Forming the concrete can be labor intensive, and therefore cost prohibitive. Insulated Concrete Forms or ICF are just one solution that has been developed to make concrete a more viable choice for residential construction. The forms include Styrofoam, which is lighter and easier to erect than the plywood forms. Concrete masonry units (CMU) construction, is composed of preformed hollow blocks of concrete that are piled set up, filled with steel reinforcement and then grouted onsite. CMU can be common, and incorrectly, known as cinder blocks. This way is a widely accepted method in Florida to get a hurricane-proof structure because of the reasonable cost versus the potency that the material provides.
A slight deviation from CMU is AAC, that stands for Aerated Autoclaved Concrete. AAC is a lightweight aerated concrete that is also done in standard size cubes, which could be stacked in place, and then filled with steel reinforcement and grouted on-site. AAC is a construction material that is somewhat new in the united states. AAC is gaining popularity because it is lightweight, energy efficient, and is comparatively simple to cut and install. I have observed details from the providers showing threaded pole systems used within the blocks, but I would not recommend this practice. Rebar designed to work with concrete should be used inside of the AAC units, rather than threaded rods.
I believe that concrete, whether it be formed-in-place concrete or concrete masonry, has inherited strength benefits that will naturally resist hurricane-force winds. Additionally, a concrete option will bring other benefits like resistance to mold, fire, and termites, as well as energy efficiency. Any of these concrete options will likely be marginally more costly than wood when evaluated based on initial price. That having been said, it must be noticed that the price over the life of the material, along with the upfront cost should be considered. For example, a wood home typically costs more to insure that the concrete home. In addition, some states have tax deductions for utilizing energy efficient materials like AAC. Finally, you have to place some value on the greater risk of a wooden house not performing too in a storm as a concrete house.
In making your choice of what material to use to build your hurricane proof home, you will likely compare price, functionality, and other factors. Don’t only assume that what everyone around you is doing will probably be adequate for your home. Be mindful that there are options to pick from, and it’s important to think about which choice is the best for your home and your preferences. Finally, do not forget that price is important, but constructing a house improperly can cost you afterwards.